Lampiweb.com

Hardware Wireless => Tarjetas y Adaptadores => Mensaje iniciado por: mandarache en Mayo 24, 2013, 12:34:18 pm

Título: Modificación SMCWCB-N FCCID RAXWN7323A
Publicado por: mandarache en Mayo 24, 2013, 12:34:18 pm
Otra buena tarjeta b/g/n y también es compatible con Comnview 6.5 Build 731.

[img width=540 height=461]http://img545..us/img545/772/imagenxqw.jpg[/img]

[img width=540 height=303]http://img259..us/img259/8721/p1130494o.jpg[/img]

[img width=540 height=303]http://img35..us/img35/1779/p1130497y.jpg[/img]

[img width=540 height=303]http://img10..us/img10/4796/p1130502t.jpg[/img]

[img width=540 height=303]http://img705..us/img705/2158/p1130507d.jpg[/img]

Un buen Atheros:

[img width=540 height=303]http://img21..us/img21/7739/p1130511eh.jpg[/img]

[img width=540 height=303]http://img839..us/img839/6888/p1130522p.jpg[/img]

[img width=540 height=303]http://img850..us/img850/3693/p1130530g.jpg[/img]

[img width=540 height=303]http://img692..us/img692/8423/p1130534iz.jpg[/img]



Mayo 24, 2013, 12:44:31 pm
Hay que eliminar las tres antenas internas:

[img width=540 height=303]http://img4..us/img4/6063/p1130538i.jpg[/img]

[img width=540 height=303]http://img89..us/img89/8445/p1130540.jpg[/img]

[img width=540 height=303]http://img405..us/img405/8307/p1130542m.jpg[/img]

Esta vez no he colocado una chapa de latón , lo he resuelto con cable de cobre de 2.5mm para unir las masas y dar firmeza:

[img width=540 height=303]http://img560..us/img560/7442/p1130563a.jpg[/img]

[img width=540 height=303]http://img823..us/img823/5355/p1130564d.jpg[/img]

[img width=540 height=303]http://img12..us/img12/9910/p1130566.jpg[/img]

[img width=540 height=303]http://img199..us/img199/48/p1130578.JPG[/img]

Compatible con Comnview 6.5 Build 731.

[img width=540 height=303]http://img59..us/img59/3617/p1130582u.jpg[/img]

Un saludo.